BIOSes for Zida Tomato motherboards

Selected PDF datasheet for TX98-3D

Selected manual or technical documentation for the motherboard Zida Tomato TX98-3D. All files were historically obtained either directly from the manufacturer or from public sources on the Internet. The manufacturer Zida Technologies has not existed for a long time and therefore only a small community of enthusiasts maintains this list. Please excuse any mistakes or unfinished works.
All available documents are (with one exception) stored in PDF format and packed from ZIP. In case of an error in the file, try downloading the manual again. If the problem persists, please contact us in the About section.


Version:

TX98-3D r1.01

Size: 180,33 KB
Release: 1998-07-30 [July '98]
Downloaded: 39×

PDF datasheets / PDF-Datenblätter / PDF руководство / Manual en PDF / PDF kılavuzu

  • Manual File name: tx983d101.zip
  • Document Revision: 1.01. Intended for Zida TX98-3D.

    Congratulations on purchasing the highest performance Pentium motherboard. With the advanced technology available today, this motherboard is designed to run Intel’s Pentium processors at speeds up to 233 MHz. The on-board system memory consists of SIMM and DIMM giving you the most flexibility for system design. It supports up to 128 MB of DRAM using standard 72-pin SIMM sockets that accept either Fast Page Mode (FPM), Extended Data Out (EDO) memory. In addition, two unbuffered, 3.3 Volts, 168-pin SDRAM sockets are also included for 16 to 256MB synchronous Dynamic memory support. A 321-pins type 7, Zero Insertion Force (ZIF) socket allows an easy upgrade path for the future Pentium Overdrive processors.

    The motherboard uses VIA VT82580VPX PCI chipset. The VIA VT82C586B PCI/ISA Bridge provides an integrated Bus Mastering IDE controller with two high performance UltraDMA-33 EIDE interfaces for up to four IDE devices (such as hard drives or CD-ROM). The PCI/ISA Bridge also including an USB interface. The integrated I/O controller integrates the standard PC I/O functions: floppy interface, two FIFO serial ports, one EPP/ECP capable parallel port, and support for an IrDA and Consumer Infra Red compatible interface.

    Four on-board 32-bit PCI local bus slots allow a higher bandwidth data path, which serves as a super highway for intensive data-movement such as video or networking. The BIOS support PCI bridge user configuration, which allows further expansion of the system with PCI peripherals. Up to two 16-bit ISA slots are provided so that the board is backward hardware compatible with the older expansion card. A total of five expansion slots can be populated with add-in cards as one PCI and ISA slots share the same chassis I/O panel. Two full lengths ISA add-in cards can be installed while the third can be half-length. All PCI cards can be full lengths.
Download manual TX98-3D r1.01

Latest Zida Tomato BIOSes

Motherboard Version Date Downloads
P845SD 1.50 2002-11-11
A815EU 1.20 2002-06-22
A845SD 1.40 2002-06-11 14×
P845GL 1.31 2002-06-06
A845DD 1.07 2002-05-18

TOP5 downloaded BIOSes

Motherboard Version Date Downloads
4DPS 4.01e 1998-12-01 114×
4DPS 1.71 1996-10-17 56×
4DPS 4.00e 1998-09-01 54×
4DPS 1.72 1997-07-08 54×
TX98-3D 1.14 1999-08-31 47×

TOP5 PDF Zida datasheets

Version Date Downloads
5SVA r1.6 1998-07-03 404×
LX98-AT r1.02 1998-10-14 118×
BX3D-CT r1.01 1998-12-12 61×
4DPS r3.10 1999-06-18 58×
EX98 r1.02 1998-10-14 54×

Copyright © 2006 - 2020, BUBIK s. r. o. | Designed by Bajola