BIOSes for Zida Tomato motherboards

PDF datasheets for Zida Tomato 6DXP

The list below lists all available manuals and technical documentation for the motherboard Zida Tomato 6DXP. All files were historically obtained either directly from the manufacturer or from public sources on the Internet. The manufacturer Zida Technologies has not existed for a long time and therefore only a small community of enthusiasts maintains this list. Please excuse any mistakes or unfinished works.
All available documents are (with one exception) stored in PDF format and packed from ZIP. In case of an error in the file, try downloading the manual again. If the problem persists, please contact us in the About section.


Version:

6DXP r1.00

Size: 291,52 KB
Release: 1998-10-16 [October '98]
Downloaded: 63×

PDF datasheets / PDF-Datenblätter / PDF руководство / Manual en PDF / PDF kılavuzu

  • Manual File name: 6dxp0100.zip
More info
  • Document Revision: 1.00. Intended only for Zida Tomato 6DXP.

    Congratulations on purchasing the highest performance Pentium Pro motherboard. With the advanced technologies available today, this motherboard is designed to run Intel’s Pentium Pro processors at speeds of 150 MHz, 166 MHz, 180 MHz and 200 MHz. The on-board system memory consists of SIMM and DIMM which gives you the most flexibility for system design. It supports up to 256 MB of DRAM using standard 72-pin SIMM sockets that accept either Fast Page Mode (FPM), Extended Data Out (EDO) and Burst EDO memory. In addition, two unbuffered, 3.3 Volts, 168-pin DIMM sockets are also included for 16 to 256MB EDO memory support. A 387-pin ,type 8, Zero Insertion Force (ZIF) socket allows an easy upgrade path for the future Pentium Pro Overdrive processors.

    This motherboard maximum utilizes Intel's 82440FX PCI chipset. The Intel 82371SB PCI/ISA IDE Xccelerator (PIIX3) provides an integrated Bus Mastering IDE controller with two high performance IDE interfaces for up to four IDE devices (such as hard drives or CD-ROM). The integrated super I/O controller integrates the standard PC I/O functions: floppy interface, two FIFO serial ports, one EPP/ECP capable parallel port, and support for an IrDA and Consumer Infra Red compatible interface.

    The five on-board 32-bit PCI local bus slots allows a higher bandwidth data path , which serves as a super highway, for intensive data-movement such as video or networking. The BIOS support PCI bridge user configuration, which allows for further expansion of the system with PCI peripherals. Up to three 16-bit ISA slots allow this board backward hardware compatible with the older expansion card. A total of seven expansion slots may be populated with full length add-in cards, since one PCI and ISA slot share the same chassis I/O panel.
Download manual 6DXP r1.00

Latest Zida Tomato BIOSes

Motherboard Version Date Downloads
P845SD 1.50 2002-11-11 63×
A815EU 1.20 2002-06-22 61×
A845SD 1.40 2002-06-11 69×
P845GL 1.31 2002-06-06 63×
A845DD 1.07 2002-05-18 65×

TOP5 downloaded BIOSes

Motherboard Version Date Downloads
4DPS 4.01e 1998-12-01 476×
4DPS 1.72 1997-07-08 336×
A845DD 1.02 2001-12-11 243×
4DPS 4.00e 1998-09-01 230×
TX98-3D 1.16m 2001-01-01 228×

TOP5 PDF Zida datasheets

Version Date Downloads
5SVA r1.6 1998-07-03 1010×
4DPS r2.00 1997-10-15 490×
4DPS r2.10 1998-01-01 483×
ZX98-CT r1.00 1999-04-22 460×
TX98-3D r1.01 1998-07-30 396×

Copyright © 2006 - 2024, BUBIK s. r. o. | Designed by Bajola