BIOSes for Zida Tomato motherboards

PDF datasheets for Zida Tomato BX3D-CT

The list below lists all available manuals and technical documentation for the motherboard Zida Tomato BX3D-CT. All files were historically obtained either directly from the manufacturer or from public sources on the Internet. The manufacturer Zida Technologies has not existed for a long time and therefore only a small community of enthusiasts maintains this list. Please excuse any mistakes or unfinished works.
All available documents are (with one exception) stored in PDF format and packed from ZIP. In case of an error in the file, try downloading the manual again. If the problem persists, please contact us in the About section.


Version:

BX3D-CT r1.01

Size: 621,38 KB
Release: 1998-12-12 [December '98]
Downloaded: 56×

PDF datasheets / PDF-Datenblätter / PDF руководство / Manual en PDF / PDF kılavuzu

  • Manual File name: bx3dct101.zip
More info
  • Document Revision: 1.01. P/N: 90-BX3D1.01-00. Intended for Zida BX3D-CT and BX98-3D.

    Congratulations on purchasing the highest performance motherboard. With the advanced technologies available today, this motherboard is designed to optimize for Intel’s processors. Three unbuffered, 3.3 Volts, 168-pin DIMM sockets are included for supporting SDRAM.

    This motherboard utilizes VIA's VT82C691 PCI chipset. The VIA’s VT82C586B PCI/ISA IDE provides an integrated Bus Mastering IDE controller with two high performance IDE interfaces for up to four IDE devices (such as hard drives or CD-ROM). The integrated super I/O controller integrates the standard PC I/O functions: floppy interface, two FIFO serial ports, one EPP/ECP capable parallel port, and support for an IrDA and Consumer Infra Red compatible interface.

    This mainboard is designed to support the new graphic interface standard, Accelerated Graphic Port (AGP), The AGP interface can reach a theoretical ~532Mbytes/sec transfer rate for 3D graphics data. On the other hand, the on-board 32-bit PCI local bus slots allow a high bandwidth data path, which serves as a super highway, for intensive data-movement such as networking. The BIOS support PCI bridge user configuration, which allows for further expansion of the system with PCI peripherals. Up to two 16-bit ISA slots allow this board to be backward compatible with the older expansion card. A total of six expansion slots may be populated with full length add-in cards, since one PCI and ISA slot share the same chassis I/O panel.
Download manual BX3D-CT r1.01

Latest Zida Tomato BIOSes

Motherboard Version Date Downloads
P845SD 1.50 2002-11-11
A815EU 1.20 2002-06-22
A845SD 1.40 2002-06-11
P845GL 1.31 2002-06-06
A845DD 1.07 2002-05-18

TOP5 downloaded BIOSes

Motherboard Version Date Downloads
4DPS 4.01e 1998-12-01 81×
4DPS 1.71 1996-10-17 51×
4DPS 1.72 1997-07-08 47×
4DPS 4.00e 1998-09-01 35×
TX98-3D 1.14 1999-08-31 31×

TOP5 PDF Zida datasheets

Version Date Downloads
5SVA r1.6 1998-07-03 382×
LX98-AT r1.02 1998-10-14 103×
BX3D-CT r1.01 1998-12-12 56×
EX98 r1.02 1998-10-14 48×
4DPS r3.10 1999-06-18 43×

Copyright © 2006 - 2020, BUBIK s. r. o. | Designed by Bajola