BIOSes for Zida Tomato motherboards

PDF datasheets for Zida Tomato GX3D-CM

The list below lists all available manuals and technical documentation for the motherboard Zida Tomato GX3D-CM. All files were historically obtained either directly from the manufacturer or from public sources on the Internet. The manufacturer Zida Technologies has not existed for a long time and therefore only a small community of enthusiasts maintains this list. Please excuse any mistakes or unfinished works.
All available documents are (with one exception) stored in PDF format and packed from ZIP. In case of an error in the file, try downloading the manual again. If the problem persists, please contact us in the About section.


Version:

GX3D-CM r1.01

Size: 3,13 MB
Release: 1999-07-27 [July '99]
Downloaded: 62×

PDF datasheets / PDF-Datenblätter / PDF руководство / Manual en PDF / PDF kılavuzu

  • Manual File name: gx983d101.zip
More info
  • Document Revision: 1.01. P/N: 90-GXCMX1.01-00. Intended for Zida CreateGX-MX, GX3D-CM, GX98-MX and GX98-CM.

    Thank You for purchasing our new generation with best performance mainboard. Our advanced technologies mainboard designs for state of art processor and the processing speed of 233MHz to 500MHz or above. The system board can upgradeable for future processors.

    The SiS chipset integrates the high performance host bus interface, the DRAM controller, the IDE controller, the PCI interface, 2D/3D Graphics accelerator and video playback accelerator. The DRAM controller supports 3-DIMM/6-Bank of 3.3V SDRAM. The maximum memory size supported per bank is 256MB, with a total of 1.5GB system memory. The memory clock frequency can be operated at up to 100MHz.

    The IDE controller is ATA-3 compliant, supporting PIO mode 0/1/2/3/4, DMA multiword 0/1/2 and Ultra DMA 33/66 operations. The two IDE channels are fully independent with dedicated 16 double-word FIFO built-in.

    The integrated 3D graphics accelerator is composed of the triangle setup engine and the rendering engine. The hardware acceleration features can be enabled by SiS driver under Direct 3D and OpenGL. The supported 3D-quality acceleration includes Gouroud Shading, Zbuffer, Alpha buffer, Perspective Correction, MipMaping, Tri-linear Texture Filtering, Specular Lighting and Dithering.

    In UMA mode operation, the integrated graphics accelerator uses up to 8MB of system memory as display memory, thereby saving the on-board DRAM cost for building a PC system.

    This Mainboard is among our “Auto Jumper” Series that eliminates the necessity for the user to be overwhelmed by jumper settings on the Mainboard. It is capable of detecting the CPU brand and core voltage, setting the appropriate CPU speed according to the instructions from the user through the CMOS setup.
Download manual GX3D-CM r1.01

Latest Zida Tomato BIOSes

Motherboard Version Date Downloads
P845SD 1.50 2002-11-11 63×
A815EU 1.20 2002-06-22 61×
A845SD 1.40 2002-06-11 69×
P845GL 1.31 2002-06-06 63×
A845DD 1.07 2002-05-18 65×

TOP5 downloaded BIOSes

Motherboard Version Date Downloads
4DPS 4.01e 1998-12-01 476×
4DPS 1.72 1997-07-08 336×
A845DD 1.02 2001-12-11 243×
4DPS 4.00e 1998-09-01 230×
TX98-3D 1.16m 2001-01-01 228×

TOP5 PDF Zida datasheets

Version Date Downloads
5SVA r1.6 1998-07-03 1010×
4DPS r2.00 1997-10-15 490×
4DPS r2.10 1998-01-01 483×
ZX98-CT r1.00 1999-04-22 460×
TX98-3D r1.01 1998-07-30 396×

Copyright © 2006 - 2024, BUBIK s. r. o. | Designed by Bajola